This page brings together the maintenance data for Toyota 8FG (petrol/LPG, 4Y engine) and 8FD (diesel, 1DZ-II or 2Z engine) forklifts in the 1 to 3.5 tonne range: the service schedule by hours, the replacement intervals, fluid capacities and types, and the main adjustment values. All figures come from the Toyota 8FG/8FD 10–35 operator’s manual.
Service intervals
| Interval | Hours | Done by |
|---|---|---|
| Daily (pre-operation check) | Every 8 hours | Operator – see our daily inspection checklist |
| Weekly | Every 40 hours | Operator / user |
| 6 weeks | Every 250 hours | Trained technician |
| 3 months | Every 500 hours | Trained technician |
| 6 months | Every 1,000 hours | Trained technician |
| Annually | Every 2,000 hours | Trained technician |
Service is due at the hours or the calendar period, whichever comes first. If a truck runs more than 250 hours in 6 weeks, use the hours. In hard operating conditions (dust, heat, heavy loads, long shifts), Toyota recommends shortening the interval to 170 hours or 1 month.
Replacement schedule
| Part / fluid | 250 h (6 weeks) | 500 h (3 months) | 1,000 h (6 months) | 2,000 h (12 months) |
|---|---|---|---|---|
| Engine oil | ● | ● | ● | ● |
| Engine oil filter | ● (new vehicles) | ● | ● | ● |
| Coolant (non-LLC) | ● | ● | ● | |
| Fuel filter | ● | ● | ||
| Torque converter oil and filter | ● | ● | ||
| Hydraulic oil | ● | ● | ||
| Hydraulic oil filter | ● (new vehicles) | ● | ● | |
| Spark plugs (4Y) | ● | ● | ||
| Brake fluid | ● | ● | ||
| DPF inline filter (option) | ● | ● | ||
| Air cleaner element | ● | |||
| Manual transmission oil, differential gear oil | ● | |||
| Wheel bearing grease | ● | |||
| Master cylinder and wheel cylinder cups and seals | ● |
Long-life coolant (LLC) is replaced every 2 years. Other parts are replaced on a time basis:
- Every 2 years: power steering hoses and rubber parts, hydraulic hoses, reserve tank hose, fuel hose, torque converter rubber hose, fork damper (option), DPF air cleaner (option).
- Every 3 years: lift chains, DPF muffler filter (option).
- Every 3 years or 6,000 hours: hydraulic oil pump seal.
- Every 10,000 hours: swing lock cylinder (SAS models).
Toyota also lists an air cleaner element replacement after six washes or one year of use, whichever comes first.
Fluid capacities and types
Capacities in litres (US gallons). “1–1.75 t” covers models 10 to 18, “2–2.5 t” models 20 and 25, “3 t” model 30 and “3.5 t” model J35; K models are compact versions.
| Item | 1–1.75 t | 2–2.5 t | K2–K2.5 t | 3 t | K3 t | J3.5 t | Type |
|---|---|---|---|---|---|---|---|
| Engine oil – 4Y (petrol/LPG) | 4.0 (1.06) | 4.0 (1.06) | 4.0 (1.06) | 4.0 (1.06) | 4.0 (1.06) | 4.0 (1.06) | API SL, SM |
| Engine oil – 1DZ-II (diesel) | 7.9 (2.09) | 7.9 (2.09) | 7.9 (2.09) | 7.9 (2.09) | 7.9 (2.09) | – | API CF-4 |
| Engine oil – 2Z (diesel) | – | 9.0 (2.38) | – | 9.0 (2.38) | – | 9.0 (2.38) | API CF-4 |
| Torque converter – 1-speed | 9.0 (2.38) | ATF GM Dexron II | |||||
| Torque converter – 2-speed | 12.0 (3.17) | ATF GM Dexron II | |||||
| Manual transmission | 3.6 (0.95) | Hypoid gear oil (see manual) | |||||
| Differential | 5.8 (1.53) | 6.1 (1.61) | 5.8 (1.53) | 8.2 (2.16) | 6.1 (1.61) | 8.2 (2.16) | API GL-4 / GL-5 hypoid gear oil |
| Hydraulic oil * | 30 (7.9) | 33 (8.7) | 33 (8.7) | 34 (9.0) | 33 (8.7) | 34 (9.0) | ISO VG 32 |
| Brake and clutch line | 0.2 (0.05) | SAE J1703 / DOT 3 | |||||
| Fuel tank | 45 (11.9) | 60 (15.8) | 55 (14.5) | 60 (15.8) | 55 (14.5) | 60 (15.8) | – |
| Radiator reserve tank (to FULL) | 1.55 (0.41) | LLC | |||||
| Grease points | As required | MP grease | |||||
* Hydraulic oil quantity for a V-mast with 3,000 mm lift; taller masts need more.
Engine cooling system (excluding reserve tank)
| Engine / transmission | 1–1.75 t | 2–2.5 t | K2–K2.5 t | 3 t | K3 t | J3.5 t |
|---|---|---|---|---|---|---|
| 4Y – clutch model | 8.2 (2.16) | 8.3 (2.20) | 8.2 (2.16) | 8.3 (2.20) | 8.2 (2.16) | 8.3 (2.20) |
| 4Y – torque converter model | 8.4 (2.22) | 8.5 (2.24) | 8.4 (2.22) | 9.7 (2.56) | 8.4 (2.22) | 9.7 (2.56) |
| 1DZ-II – clutch model | 6.8 (1.80) | 7.0 (1.85) | 6.8 (1.80) | 7.0 (1.85) | 6.8 (1.80) | – |
| 1DZ-II – torque converter model | 7.0 (1.85) | 8.4 (2.22) | 7.0 (1.85) | 8.4 (2.22) | 7.0 (1.85) | – |
| 2Z – clutch model | – | 7.9 (2.09) | – | 7.9 (2.09) | – | 7.9 (2.09) |
| 2Z – torque converter model | – | 8.1 (2.14) | – | 9.3 (2.46) | – | 9.3 (2.46) |
Use Toyota long-life coolant at 30 % concentration (50 % in very cold regions). Engine oil grade for the 4Y depends on temperature: SAE 40 above 30 °C (86 °F), SAE 30 from 0 to 30 °C (32–86 °F), SAE 20 from −10 to 0 °C (14–32 °F).
Engine service data
| Item | 4Y (petrol/LPG) | 1DZ-II (diesel) | 2Z (diesel) |
|---|---|---|---|
| Idle speed | 750 ± 30 rpm | 750 +250 rpm | 750 +250 rpm |
| No-load maximum speed | 2,570 rpm | 2,600 rpm | 2,400 rpm |
| Ignition / injection timing | 7° BTDC at 750 rpm | 0° (static) | 0° (static) |
| Firing order | 1-3-4-2 | 1-3-4-2 | 1-3-4-2 |
| Spark plug | W9EXR-U, gap 0.7–0.8 mm (0.028–0.031 in) | – | – |
| Valve clearance (warm), intake | 0 (hydraulic, self-adjusting) | 0.18–0.22 mm (0.007–0.009 in) | 0.15–0.25 mm (0.006–0.010 in) |
| Valve clearance (warm), exhaust | 0 (hydraulic, self-adjusting) | 0.33–0.37 mm (0.013–0.015 in) | 0.31–0.41 mm (0.012–0.016 in) |
| Compression, standard | 12.5 kgf/cm² (178 psi) at 250 rpm | 29 kgf/cm² (412 psi) at 260 rpm | 33 kgf/cm² (469 psi) at 260 rpm |
| Compression, limit | 9.0 kgf/cm² (128 psi) at 250 rpm | 20 kgf/cm² (284 psi) at 260 rpm | 20 kgf/cm² (284 psi) at 260 rpm |
| Fan belt deflection | 8–13 mm (0.31–0.51 in) under 10 kg (22 lb) | ||
Chassis adjustment values
| Item | Value |
|---|---|
| Steering wheel play (idling) | 20–50 mm (0.79–1.97 in) |
| Brake pedal play | 1–5 mm (0.04–0.20 in) |
| Brake pedal floor clearance | 90 mm (3.54 in) or more |
| Clutch pedal play | 1–5 mm (0.04–0.20 in) |
| Inching and brake pedal play | 1–3 mm (0.04–0.12 in) |
| Relief valve pressure – lift | 182 kgf/cm² (2,580 psi) on 1–1.75 t; 191 kgf/cm² (2,710 psi) on 2–3.5 t |
| Relief valve pressure – tilt | 120 kgf/cm² (1,710 psi) on 1–1.75 t; 150 kgf/cm² (2,130 psi) on 2–3.5 t |
| Parking brake lever force | 18–22 kg (40–49 lb); 23–27 kg (51–60 lb) on J3.5 t |
| Battery electrolyte specific gravity (20 °C) | 1.28 |
Tire pressures (pneumatic tires)
| Tire | 1–1.75 t | 2–2.5 t | K2–K2.5 t | 3 t | K3 t | J3.5 t |
|---|---|---|---|---|---|---|
| Front, single | 7.0 kgf/cm² (100 psi) | 7.0 (100) | 9.0 (128) | 7.0 (100) | 9.0 (128) | 8.5 (121) |
| Front, double | 7.0 (100) | 7.0 (100) | – | 7.0 (100) | – | 7.0 (100) |
| Rear, divided rim | 8.0 (114) | 7.0 (100) | 7.5 (107) | 7.75 (110) | – | – |
| Rear, side ring rim | 8.0 (114) | 7.0 (100) | 7.5 (107) | 7.75 (110) | 10.0 (142) | 9.0 (128) |
Forklift tires run at much higher pressures than car tires. Inflate them with a safety cage and a clip-on chuck, and never exceed the specified pressure.
Hub nut torque (front wheels, single tires)
| Model class | Torque |
|---|---|
| 1–1.75 t, 2–2.5 t, K2–K2.5 t | 18–40 kgf·m (130–289 ft-lbf, 177–392 N·m) |
| 3 t, J3.5 t | 30–60 kgf·m (217–434 ft-lbf, 294–588 N·m) |
| K3 t | 12–20 kgf·m (87–145 ft-lbf, 118–196 N·m) |
Values for double tires, divided rims and rear wheels differ – check the service data in the operator’s manual for your exact model and wheel type.
Source: Toyota 8FG/8FD 10–35 forklift operator’s manual – periodic maintenance, replacement table, service data and lubricant capacities. N·m values are converted from kgf·m (1 kgf·m = 9.807 N·m) and rounded. Specifications vary by market, serial number and options: always confirm them in the manual for your truck. See all our Toyota forklift guides.

