This page lists the main specifications of Toyota’s 8-series engine-powered forklifts from three official Toyota specification sheets: the North American Core IC Pneumatic (8FGU, 2023), the European 8FGF/8FDF (1.5–3.5 t) and the 8FG/8FD “N” series (3.5–8 t). Use it to compare models, check dimensions before buying or renting, or find the engine fitted to a truck. Values are for the standard truck with a 3 m (about 10 ft) mast; options, masts and tires change them.
Before you compare: load centre
Rated capacity always refers to a load centre – the distance from the fork face to the centre of the load. North American trucks are rated at 24 in (610 mm), European 1.5–3.5 t trucks at 500 mm and the large “N” trucks at 600 mm (with the 500 mm rating in brackets). The same truck therefore shows a higher capacity in kg at 500 mm than at 600 mm. Capacity also drops at high lift heights – always check the capacity plate on the truck.
Core IC Pneumatic 8FGU15–32 (North America, 2023)
The current North American Core IC Pneumatic comes in two engine versions: 40- models with a Kubota WG2503 2.5 L engine (gasoline or dual fuel), and 50- models with Toyota’s 4Y 2.2 L engine (LPG). Where two values are shown for the Kubota version, they are gasoline / LPG.
| Model | Fuel | Capacity at 24 in LC | Engine | Power | Truck weight | Wheelbase | Tires front / rear |
|---|---|---|---|---|---|---|---|
| 40-8FGU15 | Gasoline/LP | 3,000 lb (1,350 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 5,670 lb (2,570 kg) | 58.5 in (1485 mm) | 6.50-10-10PR / 5.00-8-8PR |
| 50-8FGU15 | LP | 3,000 lb (1,350 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 5,500 lb (2,500 kg) | 58.5 in (1485 mm) | 6.50-10-10PR / 5.00-8-8PR |
| 40-8FGU18 | Gasoline/LP | 3,500 lb (1,600 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 6,090 lb (2,760 kg) | 58.5 in (1485 mm) | 6.50-10-10PR / 5.00-8-8PR |
| 50-8FGU18 | LP | 3,500 lb (1,600 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 5,920 lb (2,690 kg) | 58.5 in (1485 mm) | 6.50-10-10PR / 5.00-8-8PR |
| 40-8FGU20 | Gasoline/LP | 4,000 lb (1,800 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 7,240 lb (3,280 kg) | 65 in (1650 mm) | 7.00-12-12PR / 6.00-9-10PR |
| 50-8FGU20 | LP | 4,000 lb (1,800 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 7,080 lb (3,210 kg) | 65 in (1650 mm) | 7.00-12-12PR / 6.00-9-10PR |
| 40-8FGU25 | Gasoline/LP | 5,000 lb (2,250 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 8,000 lb (3,640 kg) | 65 in (1650 mm) | 7.00-12-12PR / 6.00-9-10PR |
| 50-8FGU25 | LP | 5,000 lb (2,250 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 7,840 lb (3,560 kg) | 65 in (1650 mm) | 7.00-12-12PR / 6.00-9-10PR |
| 40-8FGU30 | Gasoline/LP | 6,000 lb (2,700 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 9,450 lb (4,280 kg) | 66.9 in (1700 mm) | 28 x 9-15-12PR / 6.50-10-10PR |
| 50-8FGU30 | LP | 6,000 lb (2,700 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 9,270 lb (4,210 kg) | 66.9 in (1700 mm) | 28 x 9-15-12PR / 6.50-10-10PR |
| 40-8FGU32 | Gasoline/LP | 6,500 lb (3,000 kg) | Kubota WG2503 (2,491 cc) | 56 / 58 hp at 2,600 rpm | 9,680 lb (4,390 kg) | 66.9 in (1700 mm) | 28 x 9-15-14PR / 6.50-10-10PR |
| 50-8FGU32 | LP | 6,500 lb (3,000 kg) | Toyota 4Y (2,237 cc) | 51 hp at 2,570 rpm | 9,500 lb (4,320 kg) | 66.9 in (1700 mm) | 28 x 9-15-14PR / 6.50-10-10PR |
Performance and dimensions
| Model | Travel speed, loaded | Lift speed, loaded | Gradeability at 1 mph, loaded (%) | Outside turning radius | Length to fork face / width | Right-angle stacking aisle | Fuel tank |
|---|---|---|---|---|---|---|---|
| 40-8FGU15 | 11.5 mph (18.5 km/h) | 131 fpm (665 mm/s) | 41/43 | 76 in (1930 mm) | 89.6 in (2275 mm) / 42.1 in (1070 mm) | 91.9 in (2335 mm) | 12 US gal |
| 50-8FGU15 | 11.5 mph (18.5 km/h) | 131 fpm (665 mm/s) | 43 | 76 in (1930 mm) | 89.6 in (2275 mm) / 42.1 in (1070 mm) | 91.9 in (2335 mm) | 12 US gal |
| 40-8FGU18 | 11.5 mph (18.5 km/h) | 131 fpm (665 mm/s) | 36/38 | 78 in (1980 mm) | 90.7 in (2305 mm) / 42.1 in (1070 mm) | 93.9 in (2385 mm) | 12 US gal |
| 50-8FGU18 | 11.5 mph (18.5 km/h) | 131 fpm (665 mm/s) | 38 | 78 in (1980 mm) | 90.7 in (2305 mm) / 42.1 in (1070 mm) | 93.9 in (2385 mm) | 12 US gal |
| 40-8FGU20 | 10.9 mph (17.5 km/h) | 118 fpm (600 mm/s) | 31/33 | 84.7 in (2150 mm) | 101.4 in (2575 mm) / 45.3 in (1150 mm) | 103.2 in (2620 mm) | 15.9 US gal |
| 50-8FGU20 | 10.9 mph (17.5 km/h) | 118 fpm (600 mm/s) | 33 | 84.7 in (2150 mm) | 101.4 in (2575 mm) / 45.3 in (1150 mm) | 103.2 in (2620 mm) | 15.9 US gal |
| 40-8FGU25 | 10.9 mph (17.5 km/h) | 118 fpm (600 mm/s) | 26/28 | 87.5 in (2220 mm) | 103.9 in (2640 mm) / 45.3 in (1150 mm) | 105.9 in (2690 mm) | 15.9 US gal |
| 50-8FGU25 | 10.9 mph (17.5 km/h) | 118 fpm (600 mm/s) | 28 | 87.5 in (2220 mm) | 103.9 in (2640 mm) / 45.3 in (1150 mm) | 105.9 in (2690 mm) | 15.9 US gal |
| 40-8FGU30 | 11.2 mph (18.0 km/h) | 98 fpm (500 mm/s) | 22/24 | 92.5 in (2350 mm) | 109.4 in (2780 mm) / 48.8 in (1240 mm) | 111.6 in (2835 mm) | 15.9 US gal |
| 50-8FGU30 | 11.2 mph (18.0 km/h) | 100 fpm (510 mm/s) | 22 | 92.5 in (2350 mm) | 109.4 in (2780 mm) / 48.8 in (1240 mm) | 111.6 in (2835 mm) | 15.9 US gal |
| 40-8FGU32 | 11.2 mph (18.0 km/h) | 98 fpm (500 mm/s) | 22/24 | 93.3 in (2370 mm) | 110.2 in (2800 mm) / 48.8 in (1240 mm) | 112.4 in (2855 mm) | 15.9 US gal |
| 50-8FGU32 | 11.2 mph (18.0 km/h) | 100 fpm (510 mm/s) | 21 | 93.3 in (2370 mm) | 110.2 in (2800 mm) / 48.8 in (1240 mm) | 112.4 in (2855 mm) | 15.9 US gal |
8FGF / 8FDF 1.5–3.5 t (Europe)
European trucks use the 4Y-ECS engine on LPG and two diesels: the 4-cylinder 1DZ-III (1.5–1.75 t) and the newer 3-cylinder 1ZS (2–3.5 t). The K model (8FGKF20) is a compact version with smaller wheels and a shorter wheelbase.
| Model | Fuel | Capacity at 500 mm LC | Engine | Service weight | Wheelbase | Turning radius | Tires front / rear |
|---|---|---|---|---|---|---|---|
| 02-8FGF15 | LPG | 1,500 kg | 4Y-ECS (4 cyl, 2,237 cc), 38 kW | 2,450 kg | 1485 mm | 1990 mm | 6.50 – 10 / 5.00 – 8 |
| 42-8FDF15 | Diesel | 1,500 kg | 1DZ-III (4 cyl, 2,486 cc), 17.5 kW | 2,550 kg | 1485 mm | 1990 mm | 6.50 – 10 / 5.00 – 8 |
| 02-8FGF18 | LPG | 1,750 kg | 4Y-ECS (4 cyl, 2,237 cc), 38 kW | 2,630 kg | 1485 mm | 2010 mm | 6.50 – 10 / 5.00 – 8 |
| 42-8FDF18 | Diesel | 1,750 kg | 1DZ-III (4 cyl, 2,486 cc), 17.5 kW | 2,730 kg | 1485 mm | 2010 mm | 6.50 – 10 / 5.00 – 8 |
| 02-8FGKF20 | LPG | 2,000 kg | 4Y-ECS (4 cyl, 2,237 cc), 38 kW | 3,150 kg | 1485 mm | 2040 mm | 21×8-9 / 18×7-8 |
| 02-8FGF20 | LPG | 2,000 kg | 4Y-ECS (4 cyl, 2,237 cc), 38 kW | 3,250 kg | 1650 mm | 2200 mm | 7.00-12 / 6.00-9 |
| 52-8FDF20 | Diesel | 2,000 kg | 1ZS (3 cyl, 1,795 cc), 41 kW | 3,310 kg | 1650 mm | 2200 mm | 7.00-12 / 6.00-9 |
| 02-8FGF25 | LPG | 2,500 kg | 4Y-ECS (4 cyl, 2,237 cc), 38 kW | 3,560 kg | 1650 mm | 2280 mm | 7.00-12 / 6.00-9 |
| 52-8FDF25 | Diesel | 2,500 kg | 1ZS (3 cyl, 1,795 cc), 41 kW | 3,620 kg | 1650 mm | 2280 mm | 7.00-12 / 6.00-9 |
| 02-8FGF30 | LPG | 3,000 kg | 4Y-ECS (4 cyl, 2,237 cc), 42 kW | 4,210 kg | 1700 mm | 2430 mm | 28×9-15 / 6.50-10 |
| 52-8FDF30 | Diesel | 3,000 kg | 1ZS (3 cyl, 1,795 cc), 41 kW | 4,280 kg | 1700 mm | 2430 mm | 28×9-15 / 6.50-10 |
| 02-8FGJF35 | LPG | 3,500 kg | 4Y-ECS (4 cyl, 2,237 cc), 42 kW | 4,820 kg | 1700 mm | 2490 mm | 250 – 15 / 6.50 – 10 |
| 52-8FDJF35 | Diesel | 3,500 kg | 1ZS (3 cyl, 1,795 cc), 41 kW | 4,890 kg | 1700 mm | 2490 mm | 250 – 15 / 6.50 – 10 |
Performance and dimensions
| Model | Travel speed loaded/unloaded (km/h) | Lift speed loaded/unloaded (m/s) | Gradeability at 1.5 km/h, loaded (%) | Fuel consumption (EN 16796) | Overall length × width | Aisle, 1000×1200 pallet crossways | Noise at driver’s ear dB(A) |
|---|---|---|---|---|---|---|---|
| 02-8FGF15 | 18.5/19.0 | 0.67/0.68 | 41 | 2.1 kg/h | 3290 × 1070 mm | 3600 mm | 77 |
| 42-8FDF15 | 12.0/12.5 | 0.45/0.52 | 27 | 2.4 L/h | 3290 × 1070 mm | 3600 mm | 79 |
| 02-8FGF18 | 18.5/19.0 | 0.67/0.68 | 40 | 2.1 kg/h | 3315 × 1070 mm | 3620 mm | 77 |
| 42-8FDF18 | 12.0/12.5 | 0.45/0.52 | 24 | 2.6 L/h | 3315 × 1070 mm | 3620 mm | 79 |
| 02-8FGKF20 | 17.0/17.5 | 0.60/0.64 | 36 | 2.2 kg/h | 3370 × 1155 mm | 3670 mm | 77 |
| 02-8FGF20 | 17.5/18.0 | 0.60/0.64 | 35 | 2.3 kg/h | 3575 × 1150 mm | 3870 mm | 77 |
| 52-8FDF20 | 19.0/19.5 | 0.62/0.66 | 33 | 2.3 L/h | 3575 × 1150 mm | 3870 mm | 77 |
| 02-8FGF25 | 17.5/18 | 0.60/0.64 | 29 | 2.4 kg/h | 3640 × 1150 mm | 3950 mm | 77 |
| 52-8FDF25 | 19/19.5 | 0.62/0.66 | 28 | 2.6 L/h | 3640 × 1150 mm | 3950 mm | 77 |
| 02-8FGF30 | 18.5/19.0 | 0.51/0.55 | 23 | 3.1 kg/h | 3780 × 1240 mm | 4115 mm | 77 |
| 52-8FDF30 | 18.5/19.0 | 0.50/0.53 | 25 | 3.2 L/h | 3780 × 1240 mm | 4115 mm | 77 |
| 02-8FGJF35 | 19.0/19.5 | 0.43/0.45 | 18 | 3.4 kg/h | 3850 × 1290 mm | 4185 mm | 77 |
| 52-8FDJF35 | 19.0/19.5 | 0.42/0.45 | 19 | 3.5 L/h | 3850 × 1290 mm | 4185 mm | 77 |
8FG / 8FD “N” series 3.5–8 t
The heavy 8-series uses two different engines: the 4-cylinder 1FS petrol engine (3.7 L, 65 kW at 2,350 rpm, 276 N·m) and the 6-cylinder 14Z-II diesel (5.2 L). The diesel gives 56 kW at 2,100 rpm and 269 N·m on 3.5–5 t trucks, and 66 kW at 2,400 rpm and 325 N·m on the 6–8 t trucks, which also have dual front tires.
| Model | Fuel | Capacity at 600 mm [500 mm] LC | Load centre | Engine | Total weight | Wheelbase | Outside turning radius | Tires front / rear |
|---|---|---|---|---|---|---|---|---|
| 8FG35N | Gasoline | 3,500 kg [4,000 kg] | 600 mm [500 mm] | Toyota 1FS petrol (4 cyl, 3,685 cc), 65 kW | 5,700 kg | 1900 mm | 2610 mm | 250-15 / 7.00-12 |
| 8FD35N | Diesel | 3,500 kg [4,000 kg] | 600 mm [500 mm] | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 56 kW | 5,800 kg | 1900 mm | 2610 mm | 250-15 / 7.00-12 |
| 8FG40N | Gasoline | 4,000 kg [4,500 kg] | 600 mm [500 mm] | Toyota 1FS petrol (4 cyl, 3,685 cc), 65 kW | 6,070 kg | 1900 mm | 2660 mm | 250-15 / 7.00-12 |
| 8FD40N | Diesel | 4,000 kg [4,500 kg] | 600 mm [500 mm] | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 56 kW | 6,170 kg | 1900 mm | 2660 mm | 250-15 / 7.00-12 |
| 8FG45N | Gasoline | 4,500 kg [4,990 kg] | 600 mm [500 mm] | Toyota 1FS petrol (4 cyl, 3,685 cc), 65 kW | 6,610 kg | 2000 mm | 2750 mm | 300-15 / 7.00-12 |
| 8FD45N | Diesel | 4,500 kg [4,990 kg] | 600 mm [500 mm] | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 56 kW | 6,710 kg | 2000 mm | 2750 mm | 300-15 / 7.00-12 |
| 8FG50N | Gasoline | 5,000 kg | 600 mm | Toyota 1FS petrol (4 cyl, 3,685 cc), 65 kW | 7,140 kg | 2000 mm | 2810 mm | 300-15 / 7.00-12 |
| 8FD50N | Diesel | 5,000 kg | 600 mm | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 56 kW | 7,240 kg | 2000 mm | 2810 mm | 300-15 / 7.00-12 |
| 8FD60N | Diesel | 6,000 kg | 600 mm | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 66 kW | 8,390 kg | 2250 mm | 3230 mm | 8.25-15 (dual) / 8.25-15 |
| 8FD70N | Diesel | 7,000 kg | 600 mm | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 66 kW | 9,125 kg | 2250 mm | 3280 mm | 8.25-15 (dual) / 8.25-15 |
| 8FD80N | Diesel | 8,000 kg | 600 mm | Toyota 14Z-II diesel (6 cyl, 5,204 cc), 66 kW | 9,980 kg | 2250 mm | 3320 mm | 8.25-15 (dual) / 8.25-15 |
Performance and dimensions
| Model | Max. travel speed, loaded | Gradeability at 1.5 km/h, loaded | Length to fork face / width | Fuel tank |
|---|---|---|---|---|
| 8FG35N | 23.0 km/h | 34 % | 2925 / 1350 mm | 90 L |
| 8FD35N | 22.0 km/h | 32 % | 2925 / 1350 mm | 90 L |
| 8FG40N | 23.0 km/h | 32 % | 2980 / 1350 mm | 90 L |
| 8FD40N | 22.0 km/h | 29 % | 2980 / 1350 mm | 90 L |
| 8FG45N | 23.5 km/h | 30 % | 3110 / 1450 mm | 120 L |
| 8FD45N | 22.5 km/h | 27 % | 3110 / 1450 mm | 120 L |
| 8FG50N | 23.5 km/h | 23 % | 3170 / 1450 mm | 120 L |
| 8FD50N | 22.5 km/h | 22 % | 3170 / 1450 mm | 120 L |
| 8FD60N | 19.0 km/h | 24 % | 3490 / 1965 mm | 130 L |
| 8FD70N | 19.0 km/h | 21 % | 3545 / 1965 mm | 130 L |
| 8FD80N | 19.0 km/h | 19 % | 3590 / 1965 mm | 130 L |
How to use these numbers
- Aisle width is the minimum right-angle stacking aisle: add the length of your load and a safety clearance (usually 200–300 mm).
- Truck weight matters for floors, lifts, ramps and trailers – the front axle load with a full load is much higher than the truck weight alone.
- Gradeability is the steepest slope the truck can climb at low speed; it is not a safe working slope. Never turn on a slope, and drive loaded trucks with the load uphill.
- Engine tells you which parts and service data to use – see our Toyota forklift engines guide and the 8FG/8FD maintenance schedule.
Sources: Toyota Material Handling Core IC Pneumatic 3,000–6,500 lb specifications (2023); Toyota Material Handling Europe Engine powered forklift 1.5–3.5 ton specification sheet; Toyota 8FG/8FD 3.5 to 8.0 ton series specification catalogue. Kilogram/pound and other conversions are as printed in the sheets. Specifications change by market and year – always confirm with your Toyota dealer. See all our Toyota forklift guides.



