Change oil filter 2007 Toyota Rav4 v6

Change oil filter 2007 Toyota Rav4 v6

Change oil filter 2007 Toyota Rav4 2GR fE V6

Toyota RAV4 2AZ FE

Changing the oil filter on a 2007 Toyota RAV4 with either the 2GR-FE (3.5L V6) or the 2AZ-FE (2.4L I4) engine is a straightforward process. Here’s a detailed guide for both engines:

Tools and Supplies Needed

1. Tools:
   • Oil filter wrench (cap-type or band-type).
   • Ratchet and socket set.
   • Funnel.
   • Drain pan.
   • Torque wrench (optional).
   • Rags or shop towels.
   • Gloves (optional for cleanliness).
2. Supplies:
   • New oil filter (Toyota OEM or equivalent).
   • New engine oil:
     • 2AZ-FE (2.4L): SAE 5W-30 (API grade SM or higher).
     • 2GR-FE (3.5L): SAE 5W-30 (API grade SM or higher).
   • Drain plug washer (optional but recommended).

Oil Filter Location

1. 2AZ-FE Engine (2.4L I4):
   • The oil filter is a spin-on type, located on the passenger side of the engine, near the oil pan.
2. 2GR-FE Engine (3.5L V6):
   • The oil filter is a cartridge-type filter housed in a metal filter cap, located at the front of the engine.

Step-by-Step Guide

1. Prepare the Vehicle

• Park on a level surface and let the engine cool.
• Engage the parking brake and use wheel chocks for added safety.

2. Drain the Oil

• Place the drain pan under the oil drain plug.
• Remove the oil drain plug using a wrench and let the oil drain completely.
• Replace the drain plug washer if necessary and reinstall the drain plug. Tighten to:
  • 2AZ-FE: 27 ft-lbs (36 Nm).
  • 2GR-FE: 30 ft-lbs (40 Nm).

3. Remove the Old Oil Filter

• 2AZ-FE (Spin-On Type):
  • Use an oil filter wrench to remove the filter. Be cautious as some oil may spill.
• 2GR-FE (Cartridge Type):
  • Use a filter cap wrench to unscrew the filter housing.
  • Remove the old cartridge and O-ring from the housing.

4. Install the New Oil Filter

• 2AZ-FE (Spin-On Type):
  • Lightly coat the new filter’s gasket with fresh engine oil.
  • Screw the new filter on by hand until snug, then tighten 1/4 to 1/2 turn more.
• 2GR-FE (Cartridge Type):
  • Replace the O-ring on the filter housing and lightly coat it with oil.
  • Insert the new filter cartridge into the housing.
  • Reinstall the housing and tighten it to 18 ft-lbs (25 Nm) using the filter cap wrench.

5. Add New Oil

• Remove the oil filler cap and use a funnel to pour in the new oil:
  • 2AZ-FE: Approx. 4.5 quarts (4.2 liters).
  • 2GR-FE: Approx. 6.4 quarts (6.1 liters).
• Check the dipstick to ensure proper oil level.

6. Check for Leaks

• Start the engine and let it idle for a few minutes.
• Check for leaks around the oil drain plug and filter.
• Shut off the engine, wait a few minutes, and recheck the oil level. Add oil if necessary.

7. Dispose of Used Oil

• Take the used oil and filter to a recycling center or auto parts store that accepts them.

Additional Tips

• Always double-check the specifications for your specific engine variant.
• For accurate oil capacity, refer to the owner’s manual.
• Use a quality filter (e.g., Toyota OEM or trusted aftermarket brands like Bosch, Wix, or Mobil 1).

Let me know if you need further assistance!

You might also like:

• Toyota Camry 2024 Specs
• Toyota 2UZ engine timing marks
• Valve Cover Gasket
• Toyota rav4 4WD SYSTEM
• P3000 Prius