2010 Corolla oil filter location
2010 Corolla oil filter location
Corolla oil filter location
On a 2010 Toyota Corolla, the oil filter is located on the front side of the engine, near the bottom. The exact placement depends on the engine type:
1. Engine Type:
- 1.8L 4-Cylinder Engine (2ZR-FE):
- The oil filter is a cartridge-style filter, housed within a metal filter cap.
- Location: On the passenger side of the engine, near the oil pan. Look for a round, black or silver plastic/metal housing.
- 2.4L 4-Cylinder Engine (2AZ-FE) (if equipped in some markets):
- The oil filter is a spin-on canister type.
- Location: On the front side of the engine block, close to the exhaust manifold.
Steps to Access and Replace the Oil Filter:
- Raise the Vehicle:
- Use a jack and secure the car with jack stands for safety.
- Ensure the vehicle is on a flat surface.
- Locate the Filter:
- For the 1.8L engine, you may need to remove the engine under-cover (plastic splash shield) to access the oil filter housing.
- For the 2.4L engine, the filter is visible from under the vehicle.
- Remove the Filter:
- Cartridge-Type Filter:
- Use a specialized oil filter housing removal tool to unscrew the cap.
- Replace the internal cartridge filter and O-ring.
- Spin-On Filter:
- Use an oil filter wrench to loosen and remove the filter.
- Replace the Filter:
- Ensure the new filter (or cartridge) matches the old one.
- Lubricate the new filter’s O-ring with a bit of fresh oil before installation.
- Tighten the filter securely but do not overtighten.
- Reassemble and Refill:
- Replace any removed splash shields.
- Refill the engine with the recommended oil and check the level.
Recommended Oil Filter:
- 1.8L Engine:
- Toyota part number: 04152-YZZA6 (cartridge type).
- 2.4L Engine:
- Toyota part number: 90915-YZZD1 (spin-on type).
Always double-check with your vehicle’s user manual or parts supplier for the exact part number based on your Corolla’s trim and market. Let me know if you need further assistance!